Subject: Vance's twin three rotor 4 place airplane.
From: Paul
Date: 6/27/1999, 12:53 PM
To: zz

Bulent Aliev wrote:

Hi Paul,
I have one question about the cooling cores line-up. I would think that
the inter cooler will be first then the water and oil next? Have been
thinking about it for few months about it and looks like now is the
chance to get an educated opinion from the experts.
Regards,
Bulent

Yes. It is incorrect. I did it that way to make the intercooling 
plumbing easier. It is best to have the intercooler in front
to maximise the difference in temperature between it and the
incoming cooling air to minimise the intake charge temperature.

I was just thinking about redoing that whole section of the drawing.
The intake ducts are the wrong shape and the turbochargers need to
go in the fuselage to reduce the bending moment on the pylons and add
their waste heat to the waste heat from the radiators which will
enhance the thrust from the cooling system. Four thin radiators would
also work better with less pressure loss arranged in a V shape.

I also had an idea of rubber mounting a one piece pylon that
carried both engines and the ducts for vibration isolation reasons.
The length's of the ducts shown are too long as well for 
minimum drag.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org