Jeff wrote:
I never should have done it. I sent the charts without double checking the
constants in my formulas from whenever I originally wrote it. I found that
the numbers were actually slightly better than the charts I posted. The best
improvement was the max temp of the low fuel flow case. Even after several
hours, the header tank temp rise stabilizes at about 16 deg. The numbers for
higher fuel flows are slightly better too. I'll post a chart of vapor
pressure vs. temp if I get around to it.
Jeff
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org