Paul Yaw wrote:
TOM & BOBBIE JORDAN wrote:
Paul: I contacted my supplier about the boost I was getting. He stated
that I probably was not getting nearly that much boost and that I should
measure it at the intake manifold and ignore the head pressure. He felt
that I was probably really getting only about 5# or so at the intake
manifold, due to the restrictive obstacles beyond the outlet port. I
will set up another guage to read both Hg and Lbs at the manifold and
then I will tell you the rest of the story. I should have new info next
week. Hello Robin! Talk to you later. Tom
It is quite unlikely that you are losing 6 psi through the intercooler
and plumbing. If that is the case something is VERY wrong. What model
blower do you have? You can make a pretty reasonable estimate of boost
based on blower speed, engine speed, and VE if you know exactly what the
drive ratio is.
PY
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org