Subject: Lip suction and ducted fans.
From: Paul
Date: 6/29/1999, 10:14 AM
To: zz

Jeff Spitzer wrote:

Vance and Emily Jaqua wrote:


You can compute thrust or lift if you carefully
integrate the pressure area terms thru the system
but the answer still has to equate to the total
mass times velocity change. The lip suction
represents the Mass you are bringing in from
outside the projected disk area. Heavier than air
vehicles can only fly or be propelled by grabbing
mass and throwing it in the appropriate direction.
The pressure area terms are the way the physical
body feels the fact that mass was accellerated.
They are not seperate - The laws of physics prevail.
Vance


Again, the thrust is THE SUM of Mdot*deltaV and the integrated pressures.
They are not separate nor can one be "converted" to the other.  As I said
before, the choice of the control volume determines the relative magnitude
of each.  Here's another one to shake things up.  If you choose the control
volume in a duct as the fan disk only then there will be NO (I repeat zero,
none) thrust due to change in velocity.  It will all show up in the
pressure terms.  If you draw the control volume a mile beyond the duct in
all directions then there will be essentially zero (not actually if you
really study aero) pressure terms.  Yet again, I defy you to define the
proper streamlines/cross sections to measure the thrust by change in
velocity only. Of course the pressures and velocities are related.  

Jeff Spitzer


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org