Subject: Knock sensors and 13b REW notes:
From: Paul
Date: 6/30/1999, 4:05 PM
To: zz

Turrbie@aol.com wrote:

In a message dated 6/30/99 2:44:54 PM Eastern Daylight Time,
rotaryeng@earthlink.net writes:


 There is a cast on boss on the late rotor housing just above the top
 spark
 plug. You can see the position in the picture on the ACRE NL web site.

 Paul Lamar

The turbo IIs used a boss that was just to the left of the oil fill tube, on
the center housing. This boss is present on the six port models as well, but
will need to be drilled and tapped to 10 X 1.25 mm. The boss that Paul is
describing began showing up on some 88 models. Therefore, 86, 87 and many 88
engines will not have the knock sensor boss on the rotor housing. 89 through
95 turbo engines mount the knock sensor on either the front or rear rotor
housing. I cannot recall ever seeing Mazda use dual knock sensors on an
engine.
Bruce Turrentine


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org