Subject: Low cost knock sensors electronics
From: Paul
Date: 6/30/1999, 6:58 AM
To: zz

Brian D. Cain wrote:

I was about to ask that very same question:  "How does one
effectively test a knock sensor in a live, realistic environment?"

The only thought I had was turning the crank angle sensor forward
one gear (advancing it (x) degrees across the board) and running
it into boost and wait for the all too familiar "clak clak clak", along with
puffs of black smoke out the exhaust, to rear its ugly head.

B


Its like that old saying about love ; "I'll know it when it happens".
In this case you will know it when you hear it. :-)

BTW when you assemble the crank angle sensor or distributor what is the
proper
procedure to be sure you have it set to the right gear mesh?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org