Turrbie@aol.com wrote:
The thing that has always bothered me about Mazda's reman engine, is that
they will not make any promises as to what new parts it will contain and what
has been done to recondition the used ones.
Bruce T
My feeling is if you want it done right you need to do it yourself.
That way you control the quality of parts going in such as ceramic
apex seals and teflon coated O-rings from Hayes Rotary Engineering.
In the case of the O-rings they don't add much to the cost of
the parts.
Also you may want to make some modifications to the oil squirter
and oil thermostat in the nose of the e-shaft for aircraft use.
If you don't want to do it yourself find someone that will
accept your list of parts and garantee that he will install them.
Also you don't need to pay for a new oil injection pump
if you are not going to use it.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org