Explorer wrote:
This talk about other's poor quality control makes me wonder if I will
be able to do a rebuild at home.
I have done American piston engines with no problems, so my question
is whether I can expect to be able to do a rotary, too. I have the
usual assortment of tools, and will buy the books as necessary. I do
not have quality calipers yet, but will probably get some Mititoyo's.
What else will I need?
A good shop manual and:
You can order overhaul videos from:
Bruce Turrentine
Turrbie@aol.com
919 212-0671
You can also get a lot of free help and advice on here.
Paul Lamar
Ken Powell wrote:
Do not hesitate to this rebuild yourself. It is worth it to know the
quality of the parts used in the engine (and Bruce shows you how to
make this determination). If you have done any engine work (and it
appears you have), you will find the rotary easy to work on. Be sure
to get Bruce's video first though, wish I had had it before doing a
rotary rebuild last year. As a matter of fact, I would say that
anyone who can build even the simplest of airplanes should not have
any problem following Bruce's video and performing a rotary rebuild.
Next to a 2-stroke, I don't know of an easier engine to rebuild. As a
matter of fact, it is easier than a 2-stroke because rebuilding the
built-up crank of a two stroke is not easy for me.
Ken Powell
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org