Subject: Rebuilding at home [was Mazda Engine Rebuilds]
From: Paul
Date: 7/1/1999, 11:31 PM
To: zz

X-Mozilla-Keys:                                                                                 
Explorer wrote:

Ken:  Thanks for the encouragement to rebuild at home.  I have ordered
the video, and have the Haynes books for both the early and late '80's
cars.

Does anybody know what i will need in the way of micrometers and/or
calipers?


Unfortunately the 13B  rotor housing is slightly over three inches.
You will need to mic this in several places so a 3 to 4 inch
micrometer would be handy. Calibers would do in a pinch.
You may also need to mic the e-shaft but this is rarely worn
as I understand it. The rotor bearing is just under 3 inches and
the main bearing is about 1.75 inches.

Looks like three mic's or adapter anvils to fit one.
Perhaps you know someone that you can borrow them from.

I would also check the e-shaft for run out with a dial indicator 
in vee blocks.


Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org