X-Mozilla-Keys:                                                                                 
Tracy Crook wrote:

BTW when you assemble the crank angle sensor or distributor what is the
proper
procedure to be sure you have it set to the right gear mesh?

Paul Lamar

With engine at top dead center on rotor 1, the rotor 1 trigger wheel  (the
one with two teeth) should be 30 degrees past the pickup).  This is easy to
judge since the other trigger wheel has 24 teeth that are 30 degrees apart.

Tracy Crook   rws@altavista.net
Web site:   http://www.rotaryaviation.com

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org