X-Mozilla-Keys:                                                                                 
Jeff Spitzer wrote:

At 09:46 AM 7/2/99 -0700, you wrote:

Al Fuller wrote:

I may have the opportunity to pick up relatively cheap a partially
completed Polliwagen fuselage and wings.  The builder is in his 70's, and
is afraid of the plane.  He has an IO360 which he was going to put in it,
but is keeping the engine.

So, my questions are:

[1]  Do you have info on, or know sources for  info on Polliwagens in
general (especially safety and handling)?

[2]  Do you have any opinion on the suitability of putting a rotary on this
plane?
         [One of the guys at the EAA chapter the builder belongs to claims
the Rotary will be too heavy.]

Thanks in advance.   Al.
---------------------------------------------------
Alfonso C. Fuller, Jr.    <mailto:alfuller@webworldinc.com>
Anaheim Hills, CA          [Southwestern USA]
'89 FJ-62, mostly stock.  Europa XS to be built......
---------------------------------------------------

I have a co-worker who is good friends with the designer of the polliwagen
(Joe Alvarez) here in San Diego.  That is the extent of my knowledge about
the airplane.  I can pass on info and see if Joe would be willing to make
contact.

Jeff Spitzer

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org