X-Mozilla-Keys:
Turrbie@aol.com wrote:
> I'm working on an '84 13B engine which had a small engine fire -
> probably as a result of leaking fuel injector seal.
>
> The Haynes book says to install the four oil injector lines in a
> particular order at the pump, but has no mention of where each line
> goes at the injector nozzle end.
>
> Do you know if it makes any difference which line goes to which
> nozzle? And if so, which goes where?
>
> Thanks.
There's no timing involved in the oil metering pump or the oil injectors.
(mixing the lines won't hurt anything) I can't clearly remember the oil line
layout on the 84-85 engines, but the lines are usually molded in such a way
that they come from each injector and line up in a two-wide stacked bundle.
This bundle makes the 90 degree down from the top or the engine and past the
water inlet tube, then they branch again at the pump. Just play with it
awhile and go with the best fit.
Bruce T
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org