X-Mozilla-Keys:                                                                                 
David Zubick wrote:

Hi Paul

Boy there is sure some great information in the Rotary Chat area.  As I
operate a car racing school with one of the fleets being Mazda RX-7's we
have alot of experience with Rotarys as we run them day in and day
out.(racingadventures.com)

I am looking at putting a Rotary into a falconer P-51 in the future and have
gained much from the chat area.  I figure the build will take a few years.

Thanks for all the great info and keep it up.

Kindest Regards

David
----------

Thanks David. I am up here in Ottwa using my son's computer so I am some what
limited in data for the news letter so hold those cards and letters.

Will be back later this week hopefully.

Arlington was great. There was a Coot amphib using a rotary with 650 hours.
He had a big nitrouis bottle to help him get off the water as the gross weight
was 2600 pounds.  He  was swinging a six bladed warp drive prop with
a 2.85:1 Ross PSRU. He discoverd the thrust from the Ford C6 helical sun gear
was feeding
through the e-shaft to the Mazda front cover thrust bearing and destroying it.

Chuck Harbert devised a fix for this which he will share with us soon.

More about this later.

Paul Lamar