X-Mozilla-Keys:
Bulent Aliev wrote:
The easiest solution is to put the cowl exit immediately in front of
the
prop and seal it everywhere else. The suction should be plenty to
cool for
taxi. I can't prove it would work but would love for someone to try
it and
prove me wrong.
Jeff Spitzer
It sounds easy. Many canard flyers have done lots of testing on
different cowling exit configurations and more or less it's Catch22. It
was found that close to the prop's hub they got reverse flow in to the
cowling. Further away from the hub, suction got better but disturbed the
air flow in front of the prop and reduced it's efficiency.
Central States Association's news letter has published many of the
tests.
I was thinking if all the exits for the hot air are moved above the
trailing edge, where all the low pressure areas are, it may improove the
movement of the hot air??
Bulent
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org