X-Mozilla-Keys:
Golden, Doug wrote:
I am new to the idea of using a rotary in my homebuilt. Could you provide
me with some specification detail relating to power, weight, fuel economy,
rpm range - on and on. I have a dragonfly project which was designed for a
160 lb engine (VW) but needs more power without adding appreciable weight.
Of course reliability is a first requirement - when converted to aircraft
use, do these engines lend themselves to redundant systems, ignition, fuel
delivery, etc.
With careful tuning you could get 90 HP from a normally aspirated
one rotor mazda but it would weigh around 220 pounds. Probably better
to look at a 100 HP turbo two rotor Wankel GmbH from Germany. See the
link
to their web site on the ACRE NL web site below. As I recall it weighs
less than about 120 pounds.
http://www.wankel-rotary.com/
Two rotor Mazda's wind up weighing 330 pounds or so firewall forward.
Maybe there is a website that contains all of this
information or a phone # of one of you who have been there done that.
Thanks in advance for whatever you may provide.
Doug Golden
Duluth MN
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org