Subject: Turbo configuration & monolithic SS exhaust manifold.
From: Paul
Date: 8/5/1999, 12:49 PM
To: zz

X-Mozilla-Keys:                                                                                 
charles.harbert@fmglobal.com wrote:

Paul, I saw Jeff's drawing of his 13B turbo manifold and wanted to let him know
that I saw a heavy wall cast iron version at Atkins shop. It probably weighed
6-8lbs and had nice round bends leading to the turbo inlet. It was also close
coupled at about 4 inches wide. I'll find out if they sell them and for how
much. I'm also writing a memo to Jeff on his previous posting on the turbo
design parameters.

I had an ignition problem during my taxi testing, so I haven't been able to get
airborne yet. I ended up replacing the computer control module and everything is
now working fine. I had "hard" mounted the control unit on the firewall and I
believe this was causing the problem due to the vibration. I should have known
to "soft" mount it to isolate it from the the vibration. Hope to fly it by this
weekend.


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org