Subject: 35k Rotary Attempts and turbocharger matching.BTW
From: Paul
Date: 8/8/1999, 5:46 PM
To: zz

X-Mozilla-Keys:                                                                                 
Bill Freeman wrote:

                    SNIP


Jim was trundling along at 30K + when he heard a
*HUGE*    'BANG' - from the sound, clearly something
in the airframe.  Scared the crap out of him, but as he
clenched he realized that the engine was still running
and the A/C was flying along just fine.  Couldn't
figure out what the huge BANG was.   After sweating
bullets the whole rest of the flight, he discovered on
the ground that the canopy bubble had debonded from
the canopy frame (large CTE difference!) but was trapped
and was/ is fine.  Sure made a loud noise - pulsing the canopy
right next to his ears.

Bill

CTE [Coeff. of Thermal Expansion]

Was it a steel frame? I got him there. The KIS plexi is bonded to
fiber glass everywhere.

Paul Lamar


Steel !!?? In a Long EZ !!??   The canopy frame is foam cored
sandwich composite, just like the other 99% of the airframe.
(He typed indignatly)   :-)   No - but seriously, plexiglass which
is acrylic, has a high CTE and even at "normal" altitudes, the
great length causes the front of the canopy frame (frame is *very*
stiff) to lift up at the front and rear as the canopy gets
shorter with the low OAT.   Jim just took it to the limits.

I was talking with Mike Melville at OSH and they were
seeing -71 F at 51K in the new "antenna plane".  They
are pressurized and heated, and they have to heat the
fuel to keep it from gelling in the tanks.

Bill

Well I am not going that high for sure. Besides we got
fuel heating with EFI :-)

Maybe I better bolt my windows in.

What is -71 F in C. According to my chart temp
bottoms out at 36K at -55 C and stops falling.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org