Subject: Air temp & density verse altitude
From: Paul
Date: 8/8/1999, 2:36 PM
To: zz

X-Mozilla-Keys:                                                                                 
Bill Freeman wrote:

Paul wrote:

Here is the chart on air temp & density verse altitude.
tempalti.jpg


Opps I just noticed I miss-read the 30K temp off the chart
it is -50 degrees C instead of -15 C!

snip

Paul Lamar

check out the massflow thru the rad at high alt.  It will
curl you hair - and not cool your engine very well.  Remember
IAS [Indicated Air Speed] is very low, this is a big hint 
on the massflow.

Bill

Very good point Bill. I will have to take a close look at this.
The air temp going into the intake and cooling the rad
or intercooler is much lower too so perhaps the need for the 
intercooler is not as great.

I would love to have a computer simulation for all this. 

On the other hand maybe that is the reason the intake area was 
so large on that Orenda V8 powered King Air at OSH? 

I also have some pictures of Jeff's work airplane with huge 
cooling air intakes given that it is powered by a sequential 
turbo Rotax 914 at 65K feet.

Perhaps I need a variable cooling air intake and exhaust.
The P38, ME 109 and P51 got to 40K with just a variable exhaust. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org