From: Paul <rotaryeng@earthlink.net>
Subject: 35k Rotary Attempts and turbocharger matching.
Russell Kent wrote:
Paul,
It isn't all about temperature. You have to remember thermal capacity:
that really cold air is also pretty thin; it won't take too many calories
to raise its temperature.
Russell
So what you are saying is it will be easy to heat the cabin and the air
coming out of the turbo charger and into the intercooler
will be hotter than I think?
Another excellent point. It looks more and more like we
need a computer simulation.
Paul Lamar
Brian D. Cain wrote:
Although I'm no scientist, I believe the term you guys are hunting for,
rather the equation you're looking for, is "(x) density in a given volume".
I would agree with Russell that, although ambient air temperature at
(x) thousand ft. may be much lower than at sea level, the density of the
air in a given volume is also much less.
I believe the goal, as it is in a combustion chamber, is to have as dense
an amount of mass air as possible; preferrably leaning on the temperature
and not pressure side. This is the main and only reason why I use an air
to water intercooler system in my Rx7 for lowering intake charge
temperatures efficiently. I'm not sure if this is an option in an aircraft,
however, because of the added complexity and potential weight.
B
Take another look at this chart Brian. Air density is plotted
along with temp.
tempalti.jpg
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org