X-Mozilla-Keys:
Jeff Spitzer wrote:
At 10:11 PM 8/7/99 -0700, you wrote:
This was seen at OSH on the Lancair Tiger Orenda V8 museum
peice. I think it is a good idea for turbo engines as
it minimise the length of the extra large diameter turbo
exhaust pipe winding its way around in the engine
compartment. The sooner it finds it way out the better.
It also free's up the entire bottom of the cowl for
a large area radiator. Just like Rare Bear. I like it.
I think I will use the idea on my rotary powered KIS TR-4.
The pipe will come out on the other side of course.
There will be a stainless steel radiused sheet metal
shield to streamline the exit air and protect the
firewall and the side of the composite fuselage
of course.
Mine will also come out on the side. But it's better to have the pipe
point aft rather than out. The exhaust has significant energy which should
be used for thrust. Also, the exhaust plume will cause excessive
separation as shown on the tigress.
Jeff Spitzer
What do you think of a constant area fish mouth or fan shaped exit
Jeff?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org