Subject: Oil Less Turbo or air bearings.
From: Paul
Date: 8/9/1999, 10:03 AM
To: zz

X-Mozilla-Keys:                                                                                 
Jeff Spitzer wrote:



BTW Turbonetics says the ceramic ball bearing consumes
half the HP of the plain bearing version of the turbo. I am
a bit skeptical. Not counting the HP it takes to compress
and heat the air of course.

Paul Lamar


Ball bearing turbos do have considerably improved efficiency over plain
bearing ones.  The difference is about 3% overall.  The problem with ball
bearings is the weight of the balls spinning around so fast wears out the
outer races.  Really!!! That's why ceramic balls are so important to
turbos...less ball weight and stronger to boot.

Jeff Spitzer

Do you believe the life improvements in the turbos with ceramic
ball bearings?

Paul Lamar


jelkil@interaccess.com wrote:

kevin wyum on the rx-7 list has twin ceramic turbos on his car.  I think he
overspeeded them to destruction due to wastegate failure, but should be
running again already.

Tom

Apples and Oranges Tom. Ceramic ball bearings are different than
ceramic turbines. Ceramic turbines are notoriously fragile.

On the other hand ceramic ball bearings are widely used in high 
speed NC milling machines.

Since the density of the ceramic balls is only half of that of  steel
balls  I would be skeptical about using them in a turbo designed to 
run at high speed all the time such as would be used in an aircraft 
engine.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org