X-Mozilla-Keys:
jelkil@interaccess.com wrote:
kevin wyum on the rx-7 list has twin ceramic turbos on his car. I think he
overspeeded them to destruction due to wastegate failure, but should be
running again already.
Tom
Apples and Oranges Tom. Ceramic ball bearings are different than
ceramic turbines. Ceramic turbines are notoriously fragile.
On the other hand ceramic ball bearings are widely used in high
speed NC milling machines.
Since the density of the ceramic balls is only half of that of steel
balls I would be skeptical about using them in a turbo designed to
run at high speed all the time such as would be used in an aircraft
engine.
Paul Lamar
jelkil@interaccess.com wrote:
Its ball bearing turbos he has, not ceramic turbine and compressor wheels.
They even spin for a few seconds after you shut down...
Tom
Usually only one bearing out of the two required is a ball
bearing. The other is a floating plain bearing needed for
damping weird vibratory modes.
Let me clarify my density statement. The life of the
low density ceramic ball bearing is only twice as long as a steel
ball bearing which nobody uses in a modern turbo charger anyway.
Paul
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org