Bill Freeman wrote:
Jeff Spitzer wrote:
At 12:38 PM 8/9/99 -0700, you wrote:
The list does not include provisions for waste gate exhaust manifolds.
This is likely the case. I will do the necessary modeling to determine
whether it can work without a wastegate before I commit to metal. If a
wastegate is required, one option is to just insert a "spacer" tee between
the turbo flange and monolithic manifold thus preserving the latter and
still avoiding welding. The downside, of course, being added weight, size,
cost, and complexity.
Jeff Spitzer
I wasn't going to say anything for a while and see if it came up.
Your exh manifold/turbo mount is very elegant, but it seemed to
put the turbo directly plumbed to the exh with no wastegate.
Glad you mentioned it, and a T should be OK, but steals a bit of
elegance.
I really do think your going to want a wastegate, altho a manual
one seems fine to me. In a highly variable load scenario (cars)
an automatic wastegate is a good idea, esp with the quality of
the controller available (driver is clueless). In an aircraft, the loads
are pretty nearly constant and the time spent manually adjusting
things is OK, even desirable to foster simplicity and lower cost/weight.
Plus the pilot often is better trained, esp if he designed and built the
system!
Bill
This is probably a minor point for our applications but
according to Corky Bell it is good to have a Y so the gas can get
out the waste gate easier. A drawback is now you need two exhaust
pipes. If at all possible I am still for no waste gate.
wastgate.jpg
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org