X-Mozilla-Keys:                                                                                 
Castle, Ron wrote:

Whats the cost of the seals.

About $200 each. $1200 for a 13B. Francesco told me why
the stock engine gets a groove in the rotor housing out near
the edge with the stock two and three piece cast iron seals.
The stock seals wear unevenly near the joint with the end
piece. That causes the groove in high mailage engines.
He claims his seals don't do that as they don't wear!
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org