Subject: Turbo configuration & monolithic SS exhaust manifold.
From: Paul
Date: 8/10/1999, 9:30 AM
To: zz

X-Mozilla-Keys:                                                                                 
Russell Kent wrote:

Paul wrote:

This is probably a minor point for our applications but
according to Corky Bell it is good to have a Y so the gas can get
out the waste gate easier. A drawback is now you need two exhaust
pipes. If at all possible I am still for no waste gate.

<image snipped.  --Russell>

Paul,
If the objective of our wastegate is to bleed off enough energy from the exhaust
stream to prevent overboosting at WOT at MSL, then do we care if the wastegate's
connection is non-optimal?  (I assume that a tee connection has the abiity to bleed
off enough energy.  This assumption needs testing.)

For systems that will spin down the turbine at idle (i.e. traditional wastegates), I
can see where the airflow needs to be cleanly redirected, otherwise the system fails
to reduce the airflow sufficiently to allow the turbine to stop (or nearly so).

Russell

According to Corky Bell it affects the load balance between cylinders
(rotors). Also the ability to control boost at higher revs could
disappear.
I highly recommend getting a copy of Corky's book.

Maximum Boost Published by Robert Bently.

 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org