X-Mozilla-Keys:
charles.harbert@fmglobal.com wrote:
Paul, just wanted to let everybody know that I flew the plane twice yesterday.
It flew very well, but it was a short flight (5 mins) just around the pattern.
The second flight was twice around the pattern (15 mins) so that I could check
out temps,pressures, handling, etc. These have been with my gear down and thus
I must stay under 120 kts. (140mph). My oil temp is running higher than I'd
like, but that may be because of the gear being down. I'm going to see how it
does when I retract the gear in the next flight.
To recap basics, I have a turbo (T-04Turbonetics-inconel wheel) 20B (Atkins)
with a 2.17 Ross PSRU powered Std Velocity RG and IVO Magnum in-flt adjustable.
I had done probably 10 high spd taxi tests and was concerned about oil and
coolant temps afterwards (wtr-220, oil-225), but noticed water temps went down
at the end of the taxi, so I felt that it would cool when airborne. FF was
closed pattern on a 75 deg F day. Due to a long runway hold, my T/O temps were
wtr-205 & oil-200. I set throttle at 4,400 rpm (half prop pitch in) which was
about 2psi boost (34" of 40" avail),
snips.........
You lost me here Chuck. What do you mean (34" of 40" avail)?
BTW what TO-4 trim are you using?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org