X-Mozilla-Keys:
Russell Kent wrote:
Paul wrote:
Perry Casson wrote:
Instead of hauling out your scope and hooking a camera
to it you may want look for some shareware oscilloscope
software on the net and simply plug your transducer into
your laptop's soundcard. Found something at
http://polly.phys.msu.su/~zeld/oscill.html
that looks like it would do the job.
It's not like you need something that runs 70Mhz.
Perry Casson
Hey! Another great idea Perry. You sure don't need 70 Mhz.
Audio would be fine. Thanks
BTW this idea will work great with piston engines too.
Just by looking at the pulse you could probably tell
all sorts of things about the cylinder.
Paul Lamar
Paul,
I looked at the "Windows Oscilliscope" web page. They claim a 20 KHz
"bandwidth". Remebering Nyquist, divide by 2 and you get a maximum of 10
K samples / second. If the starter turns the engine at 500 RPM, that's
0.12 seconds / revolution, or 1200 samples / revolution. One revolution
is one lobe of the rotor, so we need 3 revolutions to get all three lobes
= 3600 samples.
Now, if their "bandwidth" claim is actually the Nyquist-corrected maximum
frequency detection, then the true sample rate is double what I wrote, or
2400 samples / revolution and 7200 samples for all three lobes.
I would think that 1200 sample per lobe is enough.
Russell Kent
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org