Subject: CG and prop extentions.
From: Paul
Date: 8/13/1999, 6:10 PM
To: zz

Ernesto Sanchez wrote:

Hi Paul,
    One thing I have not heard mentioned is how the CG of the rotary
and redrive relates to an O-320.  Is it further aft?  The same?
    Second, when the EZ's (Vari and Long) started to appear most had a
prop extention on the end of the crank (4", I think).  If you look at
most EZ motor installations today everyone is running a 6", 8" or even
10" extention.  It seems the further you can get the prop from the
wake coming off the main wing the better (faster).  The guy who flew
"Pushy Galore" used a 12" extention and wanted to use a longer one.
Can I use a 8" extention on the current redrives or does anyone make a
longer redrive?  I'm worried about the redrive bearings.  I could move
the motor rearward 8" but aft CG in a canard is asking for trouble.  I
would have to move everything I could forward to balance the CG.
Thank you for you help,
Ernesto Sanchez
E-Racer #319
es12043@utech.net

Those prop extensions are always scary to me. I think the only
saving grace is people are using low inertia wood or 
composites props.

I have no idea if a Ross or any other PSRU will hold
up on a 13B with an extension. If it was me I would 
avoid it.

IMHO Here is the problem: If the CG of both blades is in the 
same plane of rotation  there will be no bending loads on
the prop shaft other than those introduced by aerobatics.
If this is not the case there will be a constant couple 
on the prop shaft that could eventually lead to a fatique
failure in combined bending and torsion. Another source
of bending stress is when the pusher blade encounters a wake
or a tractor blade encounters a change in pressure due to 
an adjacent  blunt part of the tractor cowling.

When you install a prop extension this just gives the prop
a longer lever to impose these stress's on the prop shaft.

Thanks to Vance! Here is the CG of a Continental IO-360.

For other AC engines you might try contacting the Manufacturer.

For the 13B you can measure it with a roller under the
engine and PSRU combination while mounted on a piece
of plywood.
  
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

C-IO360-CG.gif