Subject: Perry Mick ducted fan EZ 2nd flight test
From: Paul
Date: 8/16/1999, 7:51 PM
To: zz

X-Mozilla-Keys:                                                                                 
Perry Mick wrote:

Paul wrote:

Perry Mick wrote:

 Any ideas on
improving the oil temp situation?

--
Perry Mick
Duckt N7XR
http://www.mickaircraft.com/duckt.htm

Looking at this picture Perry a quick and dirty fix might
be to add louvers over the cooler in
the top surface of the wing. The brown exit duct over
the oil cooler looks restrictive. It might even be
better to merely remove it and let the hot air find its
way out the best it can.

That's an idea, however, what I was trying to accomplish
with the much greater exit area on that clamped on duct,
is to duplicated what seems to be successful for my water
cooling - using the ducted fan as a big sucker.  It is actually
doing that now, running statically on the ground, at maybe
2000 rpm, I can feel a great suction in the ram-air inlet
I have on the bottom of the oil cooler.  This got me the
20 degree improvement.  Using the louvers may still work,
but I'll reserve that for later if all else fails.  I think
by moving the oil cooler exit an inch closer to the prop,
I've destroyed some of the flow through the duct, making it
overall less efficient.  By putting the exit back where it
was, perhaps the suction effect will still work, without
degrading the propulsion.

BTW IMHO if you got rid of that bulky stock intake manifold,
cut down the cowling and got one of Tracy's EFI systems
I think you would get as much improvement as you would
get with a new prop.

I may just do that eventually, I like Tracy's EFI because
it has some redundancy that I don't have now.  But that would
be a big project and probably shut me down for 6 months
(I know how long these things take me).  I'm having so much
fun flying it now even though it's sluggish.  I'm thinking
now about sealing up the oil-cooler exit duct to the oil
cooler with RTV, trimming the oil-cooler exit back forward an
inch, and go fly again.

--
Perry

BTw make a new duct in your spare time and make it look
like the three rotor ducted fan duct in Ramona. :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org