Subject: Eazy intake EFI manifold.
From: Paul
Date: 8/18/1999, 9:11 PM
To: zz

X-Mozilla-Keys:                                                                                 
Bulent Aliev wrote:



Another idea. Does anybody know of a two part foam that would
be flexible after cure. I am thinking of casting it in the
greased up sched 40 PVC pipe, extracting it after cure and using
it as a male mold for an epoxy fiberglass manifold.

Paul Lamar

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

You can build any  form from blue, expanded styrene foam. It's very easy to shape.
Than cover it in packing tape. Make the lay ups with glass and epoxy resin (NOT
Polyester. It will dissolve the foam) over the taped mold. After cure wash out the
foam with gasoline and you are done.
Bulent

I was trying to short cut the cutting and sanding process.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org