Subject: Eazy intake EFI manifold.
From: Paul
Date: 8/19/1999, 10:35 AM
To: zz

X-Mozilla-Keys:                                                                                 
Russell Kent wrote:

Paul wrote:

Another idea. Does anybody know of a two part foam that would
be flexible after cure. I am thinking of casting it in the
greased up sched 40 PVC pipe, extracting it after cure and using
it as a male mold for an epoxy fiberglass manifold.

Why flexible?

I had a thought: seal off the ends of the flexible PVC with plastic, position PVC
into place, then fill with that expanding insulation foam (be careful! it expands
*ALOT* and sticks to *EVERYTHING* :-).  Let cure, then remove PVC, separate with a
Dremel tool.  Voila'! Male inside mold.

Then Bill Freeman wrote:

No need to slip it out.  Just cut off the PVC with an abrasive wheel in a dremel
tool.   Wrap the form in duct tape with no overlaps (cut thru the overlap with a
razor blade then peel off
the under and overlap pieces for a perfect butt joint, like wall papering).

Damn, beaten to the punch again!  :-)

Then Paul replied:

Great idea Bill! Start with the flex pipe, bend it into the shape you want, fill it
with
self rising foam, cut away the pipe and guess what!
I wonder what eats self rising urethane foam?

Sounds like we need to do some more experimenting... :-)

Russell Kent


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org