X-Mozilla-Keys:
Wschertz@aol.com wrote:
In a message dated 8/19/99 18:04:07, you wrote:
Vance Jaqua wrote:
Ken McCormick made his intake
manifold for his Subaru using that foam heat jacket
they sell for hot water pipes - the same stuff some
people use for padding hang glider bars etc - Epoxie
glas over and "pick" it out
Vance
Paul,
As a variant, take the foam heat jacket material, make it assume the shape
you want, then make a plaster of paris two part mold by building a shallow
box around the shaped tube, pouring in enough plaster of paris to cover
one-half of the foam, let set, apply mold release, and pour in the rest. Now
you can pop the mold apart, remove the hose, and smooth the mold if necessary.
Reassemble the mold and pour in parrafin wax, let harden, and when removed
from the mold you have a wax male form to lay your fiberglas/carbon composite
over. When cured you can remove the wax by melting it, and the wax to make
another (until you have 4)
They will all be identical.
I believe that this is the way Ford and Chevy make their composite manifolds,
except I think they use Bismuth instead of wax.
Bill Schertz
Now we are getting real proffesional here. Sounds like another excellent
plan.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org