Subject: PVC pipe thermal properties in intake EFI manifold.
From: Paul
Date: 8/24/1999, 4:49 PM
To: zz

X-Mozilla-Keys:                                                                                 
Al Fuller wrote:

Hi guys.  I did a little quick research on the web regarding the thermal
properties of PVC and CPVC pipe:

At http://eslon.com/specific_data.html  they say that you only get 158F out
of the PVC, and 218F from the CPVC before you get thermal vibration and
softening.  Scorching by Carbonization and Dehydrochloration are said to
not occur until above 400F, but the softening at lower temps is probably
enough for me....

At http://canplas.com/industrial/pipe.htm they have slightly lower numbers,
but in the same range.

I assume that the pipe was designed to operate at various pressures, which
may not be applicable in this use, but I have no idea whether the lack of
pressure would allow service to higher temperatures.

Do any of you engineers out there know what to make of this data?


It don't look good.

Paul Lamar

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org