X-Mozilla-Keys:                                                                                 
Turrbie@aol.com wrote:

In a message dated 8/27/99 2:22:30 AM Eastern Daylight Time,
rotaryeng@earthlink.net writes:

Pebvjs@aol.com wrote:
 >
 > Paul;
 > My factory 1986 Mazda RX-7 workshop manual says that both the white

(outer)

 > and the blue (inner) sealing rubber painted surface should face the outer
 > wall in the groove.
 > Ed.

 This one was red with Teflon.
 What do they mean outer wall? Is that the wall furthest from
 the combustion chamber?

 Paul Lamar

I'm not quite following the point of this but, the housing and it's O-ring
placement are exactly as they came from the Mazda factory. In other words, a
Mazda technician placed those O-rings in the housing and I have not disturbed
them.
Bruce Turrentine

It appears to be wrong. There's more. Keep reading :-)
Which way do you install those O-rings with "white paint"?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org