Subject: Cracking under front(as in car) cover.
From: Paul
Date: 8/31/1999, 8:20 PM
To: zz

X-Mozilla-Keys:                                                                                 
Turrbie@aol.com wrote:

In a message dated 8/31/99 6:50:01 PM Eastern Daylight Time,
rotaryeng@earthlink.net writes:

Brian D. Cain wrote:
 >
 > My front cover on my current engine has those 'spider' cracks in two
 > corners of it.  However, this was brought off of another vehicle that
 > may or may not have had a wreck in its history; I'm just not familiar
with
 > it.  I was concerned about the cracks, at first, but it turns out that it
 > doesn't leak a bit.
 >
 > B
 >
Brian,

Those spider traces are common, especially on the inside of the cover. I
think that it is a characteristic of the die casting process they use. They
are present in most of the covers that I have.
Bruce Turrentine


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org