X-Mozilla-Keys:
Mark Steitle wrote:
This subject may have been covered in depth months past. If so, I
apologize, but I still need the information. Maybe there is a new
solution to an old problem.
I have been investigating ignition/EFI controller options for use on a
20b three-rotor, I recently received the attached reply from Haltech,
Inc. The addition of the third rotor creates some unique problems in
search of unique solutions. As I understand things, the wasted spark
system won't work on the three-rotor. The criteria for my system are:
1) Direct fire
2) Redundant
3) Efficient (multi-spark system)
4) Control both ignition and fuel injection
5) Proven/reliable system
I'm sure that there are other solutions, this appears to be just one
possible route, IMHO. Haltech's url is: <http://www.haltech.com.au/>.
I'm open to other possibilities... MSD, etc. Any suggestions?
MS
P.S. I have no financial interest or business relatitonship with Halteh, Inc.
Date: 9/1/99 10:55 AM
From: Haltech
The E6S-8 is used in conjuction with an IG5 on a 3 Rotor application. The
E6S-8 controls fuel and leading spark. The IG5 controls the trailing spark
and this is set 10 degrees behind the leading.
A complete package is about $1700
-----Original Message-----
From: Mark Steitle <msteitle@mail.utexas.edu>
To: haltech.usa <haltech.usa@airmail.net>
Date: Wednesday, September 01, 1999 9:24 AM
Subject: Mazda 3 rotor (20b)
Will your E6S or E6S-8 work on a three rotor Mazda. It has two injectors
per rotor (cylinder) and two spark plugs per cylinder. The trailing plug
needs to fire ten degrees behind the leading plug. Thank you,
Mark Steitle
See the ACRE NL web site below for other EFI/IGN controller suppliers.
Jim Mederer of Racing Beat is using Ole Buhl's system
http://www.obr.dk/
on his 900 HP turbo three rotors running on 100LL.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org