Been working on the web site to refine a few PSRU drawings.
Here is one showing the details on the sun gear bearings
and the Ford ring gear bulk head modifications.
The bolts holding the bulkhead to the prop shaft
are not a problem. If it were not for the size of the hole
in the stock bulkhead I could probably go down a bit
on the prop shaft diameter.

psru5.gif

I will be interested to see what Tracy Crook comes up with.
I hope he publishes a drawing in his newsletter.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org