X-Mozilla-Keys:
Bulent Aliev wrote:
Hi Paul, you may find this one interesting in regards to your instrument
panel efforts.
Bulent
Subject: COZY: Re: Inst. lamp dimmers
Date: Sun, 05 Sep 1999 12:14:56
From: "Robert L. Nuckolls, III" <nuckolls@aeroelectric.com>
I built the dimmer you designed, mentioned in the RV-List, some time ago.
It worked! I played around with an idea I had that would make the
instrument light level vary with ambient light intensity. By using a
photoresitor (RS part), I got the light to dim when the ambient light was
high, ie, daylight. This was the opposite of what I was looking for, so I
wired a 2N2222 transistor across the pot, controlled by the photoresistor.
This worked fairly well, dimming the instrument light as the ambient light
decreased. The pot still operated to trim the light level. I suppose with
more tinkering, I could install a trim pot to vary the response rate of the
photoresitor.
Good for you! Autodimming has been with us for awhile. The
Cessna 400 series radios and some of the earlier autopilots
produced some of industry's first whacks at the problem.
I think it was fairly successful . . . you will probably have
to tinker with the resistors associated with the photoresistor
to set min-max ratios . . . but you can do this on the bench
using a wall-dimmer on an overhead bulb to simulate approaching
darkness.
Turn down ambient lighting down all the way and let your eyes
dark adapt for about 5 min . . . bring lighting up until you
can just read the panel with no additional lighting . . . this
is the light level where panel lighting wants to be "max" . . .
then dim room lighting to full dark and adjust the "min" to
the right level. . . . doing this on the bench (or in the
shop sitting in the cockpit) will get you in the ballpark
making it unlikely that further fiddling will be needed later.
This is all just benchtop tinkering....It hasn't been installed in any
cockpit, so the variables of cockpit brightness, photoresistor location,
etc., would have to be worked out. I don't know if you could get ideal
automatic instrument light dimming, but I'm forwarding you this as food for
thought.
Of course radios have photo-resistors right on their
front panels . . . a bit of a pain in the whatsit since
your hand shades the photodetector when you reach for
controls . . . just when you most want to see what's going
on, the lights on the device dim down! Your notion of
finding a suitable photo detector location NOT on the
panel is a sound one.
Your efforts are a good example of ways amateur builders
can provide bells and whistles that spam can drivers
can only wish for. . . Let us know how it works out.
Better yet, write up an article and share the knowledge.
Bob . . .
http://www.aeroelectric.com
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org