X-Mozilla-Keys:                                                                                 
Bulent Aliev wrote:

Hi Paul,
I have been looking at your mount for a long time and like the details.
One problem: I'm not an engineer and can not get an overall image of the
design from the detail closeups.
What is the source for the rubber mounts and will it be suitable for a
pusher Cozy? What is the suggested grade of aluminum to be used?
Regards;
Bulent

Barry Controls sells the rubber isolator.
Yes the mount will be suitable for a cozy as it 
is mostly sized to the weight of the engine.

http://www.barrymounts.com/

I just found a piece of channel
in a used metal place that is 6061 T6. 
$2.40 per pound. $6 cutting charge.
Aluminum weighs .1 pound per cubic inch.

6061 is a good weldable aluminum alloy.
BTW 3 by 1 by 1/8 channel will also work.
They had some of that in stock as well.

I will try to do a 3d sketch although I am not good
at that. Anybody else care to try?

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org