Bulent Aliev wrote:

I see another problem Paul. I think the thrust line is about 1.5'' below
the upper longerons. The top of upper longerons is WL 23 and the thrust
line is at WL 21.5". On your drawing the shaft is at about WL26.
Just looked over the plans and think that side bracing to the spar is
possible. I assume these braces are supplementary to the main firewall
hard points. My main spar is in storage but I have the fuselage in my
room. So I measured and think that we have about 28"-30" space from the
center line, for the extra attach points on the spar.
I have attached side and top view of the area.
Bulent

Paul wrote:

I will adjust the thrust line on the drawings  and get them back to you.
Thanks for the drawings.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org