Subject: Engine parts wanted to buy.
From: Paul
Date: 9/8/1999, 2:53 PM
To: zz

X-Mozilla-Keys:                                                                                 
I was over at Mazdatrix this morning picking up a couple
of different kinds of tension bolts and a junk rotor housing
to cut apart for the overheating R&D oven trick. Dave Lemon told
me he needs some used parts. If you have any of these parts give
him a call or send email. See the ACRE NL web site for the
Mazdatrix web site address.

Parts from 89 to 92 NA and turbo's engines:

Tension bolts
Front covers
Front pulleys
Oil pans
Oil pickup tubes
Pump gears
Eccentric shafts.

Dave blew his 20B drag engine with too much nitro all at once.
Shattered a stock cast iron apex seal and chewed up the 
rotor housing and rotor.

I have recieved some information that the metal 3 mm seals coming 
from Hurley Engineering in England are tougher but softer. 

http://www.hurley-engineering.ltd.uk/

Rumor has it they stand up to detonation better.
The question is: how fast are they going to wear?

I would think that a ceramic coating on the wear surfaces
of a tough steel apex seal might be the way to go.
Perhaps detonation gun sprayed on. The sky would be
the limit for HP if this problem could be solved.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org