X-Mozilla-Keys:
JMLBlues@aol.com wrote:
Oils designed for use in over the road truck engines are more or less
compatible with passenger car engines. The truck oils often have some
different characteristics:
Viscosity is usually 15W-40, whereas cars specify 10W-30 nowadays. Reason is
that cars eke out a bit more MPGs with the thinner oil, trucks are looking
for 800,000 miles between overhauls.
Truck oils have higher levels of detergency and dispersants. These are to
deal with the soot that can accumulate as a result of the diesel combustion
process.
Truck oils have high "overbase" additives, to keep the oil from becoming
acidic and generating corrosive wear. This is because diesel fuel used to
have (maybe still does) higher sulfur content than gasoline, which causes
sulfuric acid to form and get in the oil. Also, truckers want to extend the
oil drain intervals out as long as 20,000 or even 30,000 miles, so a lot of
margin is required against additive depletion.
The different additive packages could cause higher levels of ash deposits in
gasoline engines (and in particular, rotary engines) especially on the spark
plugs.
Jon Lauter
Rotary Power Marine Corporation
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org