Subject: Belleville spring washers keeping the slop out of TR bearings.
From: Paul
Date: 9/9/1999, 6:04 PM
To: zz

X-Mozilla-Keys:                                                                                 
Rich wrote:

BTW a crush spacer won't work as we are trying to compensate
for the aluminum housing expanding and contracting with temp changes.

Paul Lamar

How hot are the temps that the aluminum housings are exposed to?

Rich

I would say 220 F max and perhaps if you fly in the North you
might be able to get the engine started at 30 degrees F below zero.
Not recommended but probably possible.

If its more than about 220 F your PSRU is trying to 
tell you something or you need aPSRU oil cooler. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org