Subject: Belleville spring washers keeping the slop out of TR bearings.
From: Paul
Date: 9/9/1999, 2:22 PM
To: zz

X-Mozilla-Keys:                                                                                 
Rich wrote:

Bill don't forget those Belleville washer springs on those
tapered roller bearings. The more I think about that the
better I like it for a PSRU application. Won't work for
all tapered RB's but looks ideal for this purpose. What
do you think?

I'm not sure how you will be using those Belleville (spring) washers but
in my experience working with CNC machines for the past 15 years, about
once every 2 years, some of the springs will break and need replacing.
There are about 80 or so springs on the drawbar which holds the tool
holders into the tapered spindle. Keep in mind, in a year the tool
changer makes almost 80,000 cycles. This is an average. The springs are
only under full compression as the tool is inserted or removed. The
compression is less when actually holding the tool. The full compression
time on the slowest machine is about 12 seconds per cycle.

Rich


BTW a crush spacer won't work as we are trying to compensate
for the aluminum housing expanding and contracting with temp changes.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org