X-Mozilla-Keys:
Ed Anderson wrote:
Hi Paul,
You are correct, the bosses on the rotor housing are for knock sensors
for the 91 Turbo II (at least). I finally found them in my 91 Shop manual
on a drawing. Apparently on the 89-91 NA 13Bs the knock sensor is still
mounted on the center housing at least based on the drawings for the
non-turbo 91. Guess the previous owner of the block did not want the knock
sensor and simply plugged the holes with a set screw - or perhaps they come
that way in a new housing. Thanks for clarifying the mystery.
Ed
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org