X-Mozilla-Keys:
Cyprian Troyer wrote:
Mr. Lamar,
I recently started reading the newsletter and have so far found it to be
very interesting.
Just had two quick thoughts to share:
First, on the topic of modifying the through bolts; by necking the
diameter of the bolt down to very slightly less than the minor diameter
of the threads, the fatigue life should be increased, especially under
resonant conditions, since the stress riser at the end of the threaded
portion would be removed.
Ironically the necked down bolts had a bending resonent condition that
caused them to sometimes fail. The solution was to coat them with
RTV when installing them. Mazda also tried extending the threaded
portion on some of the later necked down bolts. Very late bolts are
not necked down for some strange reason. Probably cost.
Second, I am curious about what kinds of prices Tracy Crook was quoted
when he looked into die casting a bell housing for his PSRU. I work as a
toolmaker for a company that does die casting, and I wonder if I could
be of any help in this area. ( I rather like his design, but the
entrepreneur in me sees an opportunity.)
Thanks,
C. Troyer
We would love a die cast bell housing. One can buy a diecast bell
housing from Mazda for about $200 to $300 I would guess. A die cast
Ford C6 planetary housing would be even more desireably.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org