Subject: Jim Mosur's rad temps in and out & Comprehensive Cooling summation.
From: Paul
Date: 9/27/1999, 3:55 PM
To: zz

X-Mozilla-Keys:                                                                                 
Jeff Spitzer wrote:

At 01:15 PM 9/27/99 -0700, you wrote:

Maybe I can talk Mazdatrix out of a spare pump and mount it in my lathe.


Don't forget that we really need to know the flow of the *whole system* not
just the pump.  Better to install a flowmeter on a running engine.  I also
have a spare pump and a lathe but had not thought of using them together.
I don't recall how fast my lathe turns but it should do the trick.  If
someone will tell me flow and pressure of a engine mounted pump then I can
simulate the equivalent orifice on the lathe setup and go to work on the
improvement.

Jeff Spitzer

Put a variable orfice on it Jeff and give us a range of flows.
Wide open to stall or cavitation.

Paul Lamar.
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org