Subject: Looking for a 100-120 Hp rotary engine
From: Paul
Date: 9/28/1999, 10:16 AM
To: zz

Romulo Augusto wrote:

Paul, greetings,
a friend my is looking for a  100-120 Hp rotary engine, complete or in parts, to
use in a light experimental airplane ( Flamingo).
If you or any of the guys would have one, please, let's us know.

João Carlos adress: jc@ep-seal.petrobras.com.br

Thank you all in advance
________________________________________________________
Romulo Augusto da Cruz, Jr, Ten.Méd. , Cozy #0730
Rua da Bahia 1345/sala1103 Lourdes Belo Horizonte, MG
Fones: 55-31-274-5667, 55-31-9948-2075, 55-31-497-2080
http://www.geocities.com/capecanaveral/hall/3186

Sounds like it is between a Mazda and a Wankel. If he can use
100 HP the Wankel turbo, direct injection, heavy fuel engine 
might be just what he needs. Here is a picture. Contact Wankel for 
availabilty and pricing. The Wankel web site is listed on 
our web site  below.

BTW a one rotor version of this engine was on the dyno when I was 
at the factory. It had just completed the FAA 150 hour 
certification test with flying colors. Peice of cake.

A few numbers from the dyno data.
At 28KW (37 HP) it was burning 264 grams per KW/hour
and at 35KW (47 HP) it was burning 285 grams per KW/hour.

I believe that is slightly under 0.47 pounds per BHP/hour.
But who cares in Europe. Diesel fuel is half price
due to much lower taxeson diesel fuel.

BTW One HP is .745 KW.

Water inlet temp was 39C and outlet temp was 81C.
Charge air temp out of the turbo was 94C and out of
the intercooler it was 40C.

Oil cooled rotor plain bearings. 
Part number DVLDE-407-SDT.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org