X-Mozilla-Keys:
Jeff Spitzer wrote:
Paul Wrote:
Oh and AN -12 fittings as well.
Sign me up for two.
Paul Lamar
AN -12 is nowhere near big enough for the required water flow. I just
noticed this when I read it again. The inlet and outlet fittings on the
stock pump are for 1.5" hose IIRC. This is the minimum hose size I would
recommend. The fastest way to screw up an otherwise decent cooling system
is to use lines that are too small and kill the flow. Even the -16 hose
would be too small if you're really in love with the braid stuff.
Jeff Spitzer
Yes. I am in love with it :-)
Is there some kind of 1.5 ID hose connection that is better than a hose
clamp?
I have seen some new types of couplings used on late road race cars
but don't know where to get them. I need to make a visit to Earl's
Supply.
We have always had problems with hose clamps on our racing cars
and we have used AN-16 for 700 HP for 24 hour races. When we switched to
AN
fittings from hose clamps our cooling system reliability went up by a
factor of ten or so.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org