Subject: Turbo air through radiator
From: Paul
Date: 10/5/1999, 9:25 AM
To: zz

X-Mozilla-Keys:                                                                                 
Fred wrote:

Don't do it.  Two reasons:

1) Turbo compressor performance is degraded by higher inlet temperatures, and
the compressor outlet temperatures will be higher as well raising the
possibility of detonation. Taking radiator heat into the turbo just recycles
the heat.  You would get hot day performance on a cold day, and on a hot
day....

2) The air flow required through the radiator is much greater than the
combustion air requirements of the engine.  I looked up the energy balance
and mass flows around a liquid cooled V-8 engine installation I have been
analyzing.  I normalized the figures to 100 horsepower.

Combustion air flow required: 0.167 pounds per second
Radiator air flow required (cold ambient, high altitude) 1.389 pounds per
second.

Higher air temperatures will require higher flow rates through the radiator
to achieve equivalent cooling.   So a rough rule of thumb migh be that
radiator air flow  is about 10 times the combustion air flow.

I am doing similar analysis for Marv Kaye's Lancair installation to help him
size the radiator and oil cooler and estimate inlet and exit areas.  I will
try to provide general guidelines for all to use to help eliminate some of
the uncertainty associated with liquid cooling installations.

Fred Moreno
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org